Appendix C: Packmat Preventative Maintenance Parts

Hydraulic Oil

USA - AW46

Europe - HV46

‍

NOTE - there are two types of high pressure oil filters & sensors, please refer to the information below to identify which filter & sensor is on your unit.

If the identification plate shows "Made in France" (Gray housing on high pressure oil filter)

Low Pressure Filter:
- Low Pressure Filter with Casing: P/N: OMTF222C10NA1
- Filter: P/N: CR222C10R (CR300A)
High Pressure Filter:
- High Pressure Filter with Casing: P/N: HD 152-166 ed8/34150300
- Filter: P/N: SH52007
Clogging Indicator: P/N: DG 062

‍

If the identification plate shows “Made in Canada” (Black housing on high pressure oil filter)

Low Pressure Filter:
- Low Pressure Filter with Casing: P/N: OMTF222C10NA1
- Filter: P/N: CR222C10R (CR300A)
Breather: P/N: OMT0075 TR2
High Pressure Filter:
- High Pressure Filter with Casing: P/N: FMM-150-3B-AG-2-A10N-P01
- Filter: P/N: HP1503A10ANP01
Clogging Indicator: P/N: DEA50HA50

Equipment Schematic

A detailed overview of the main mechanical components of the PK608 compaction system.

Total Height of the Machine

This schematic highlights the total height reached by the PK608 during full arm extension, helping visualize clearance requirements during operation.

Minimum Distance to Keep From Wires

Visual reference indicating the required clearance distances between the machine and nearby power lines to ensure safe operation.

Maximum Authorized Slopes and Canting Limits

Visual references indicating the maximum authorized incline and canting angles to maintain machine stability during operation.

PK608 Controls

Visual reference of the PK608 operator controls.

Hydraulic Oil

This section outlines the recommended hydraulic oil types based on the climatic conditions of the operating region.

Before Departure

Pre-operation inspection steps to help ensure the PK608 is safe and ready for use.

Vehicle Operation

This section outlines the general operating procedures for using the PK608, including vehicle positioning, system operation, and compaction techniques.

Emergency Troubleshooting

This section explains how to manually operate the machine using the hydraulic control levers in the event of an electrical or joystick failure.

Safety Requirement Information

Mandatory safety guidelines and precautions required for proper machine operation.

Maintenance

Routine maintenance procedures designed to preserve equipment performance and reduce downtime.

Recommended Toolkit

Suggested tools to support safe operation and basic maintenance.

Appendix A: Packmat Operation Tips Sheet

Quick guidance to ensure safe and efficient operation of the Packmat unit, including best practices for daily use, roller positioning, and common troubleshooting steps to resolve typical issues in the field.

Appendix B: Daily Operation SOP

Step-by-step overview of the operator’s daily workflow, from clocking in and reviewing job details to completing compaction, documenting the visit, and progressing through scheduled jobs efficiently.

Appendix C: Packmat Preventative Maintenance Parts

Reference guide for required hydraulic oil specifications and replacement parts, with identification based on unit origin to ensure proper maintenance and compatibility.

Appendix D: New Driver Operator Checklist

Essential checklist to guide new operators through key safety, operational, and daily responsibilities when using the Packmat unit.

Appendix E: Controls Reference Guide

Overview of the Packmat control system, outlining the main functions and inputs used to operate the unit safely and effectively.

Appendix F: Emergency Troubleshooting Stickers Visual Recap

Quick visual reference of key troubleshooting stickers, highlighting essential actions and reminders for resolving common issues directly in the field.