Welcome
Workspace Management
Renaming your workspace
What’s The Difference Between A Manager, Team Member, And Collaborator?
Add A Tea m Member To Your Workspace
Project Setup
Renaming your workspace
What’s The Difference Between A Manager, Team Member, And Collaborator?
Add A Tea m Member To Your Workspace
Project Management
Renaming your workspace
What’s The Difference Between A Manager, Team Member, And Collaborator?
Add A Tea m Member To Your Workspace
FAQs
Welcome
PK707 Unit
PK608 Unit

Emergency Troubleshooting

In case of electrical failure or joystick malfunction, the machine can be retracted manually using the hydraulic manual control levers located on the operator side.

Activating the hydraulic levers

Each lever is activated by pressing the small release button under the hydraulic valves while moving the lever.

*Refer to Appendix F for a visual recap of the of the stickers located on the truck.

Lever functions

  • Left lever:
    • Push = Raise the boom
    • Pull = Lower the boom
  • Center lever:
    • Push = Raise the intermediate arm
    • Pull = Lower the intermediate arm
  • Right lever:
    • Push = Move roller to the back of the container
    • Pull = Bring roller back toward the truck

‍

Retraction procedure in emergency mode

  • Bring the roller forward
    • Pull the right lever to move the roller as close as possible to the front of the container.
  • Fold the intermediate arm
    • Push the center lever to raise the intermediate arm until all movement stops.This confirms it is at maximum position.
  • Lower the boom
    • Pull the left lever to lower the boom.

CAUTION – Delicate operations

  • Manual hydraulic controls are very sensitive.
  • Operate slowly and smoothly.
  • Excessive speed can cause serious damage to machine components.

Equipment Schematic

A detailed overview of the main mechanical components of the PK608 compaction system.

Total Height of the Machine

This schematic highlights the total height reached by the PK608 during full arm extension, helping visualize clearance requirements during operation.

Minimum Distance to Keep From Wires

Visual reference indicating the required clearance distances between the machine and nearby power lines to ensure safe operation.

Maximum Authorized Slopes and Canting Limits

Visual references indicating the maximum authorized incline and canting angles to maintain machine stability during operation.

PK608 Controls

Visual reference of the PK608 operator controls.

Hydraulic Oil

This section outlines the recommended hydraulic oil types based on the climatic conditions of the operating region.

Before Departure

Pre-operation inspection steps to help ensure the PK608 is safe and ready for use.

Vehicle Operation

This section outlines the general operating procedures for using the PK608, including vehicle positioning, system operation, and compaction techniques.

Emergency Troubleshooting

This section explains how to manually operate the machine using the hydraulic control levers in the event of an electrical or joystick failure.

Safety Requirement Information

Mandatory safety guidelines and precautions required for proper machine operation.

Maintenance

Routine maintenance procedures designed to preserve equipment performance and reduce downtime.

Recommended Toolkit

Suggested tools to support safe operation and basic maintenance.